LARC-13 adhesive development

A LARC-13 type adhesive system was developed and property data obtained that demonstrated improved thermomechanical properties superior to base LARC-13 adhesive. An improved adhesive for 589 K (600 F) use was developed by physical or chemical modification of LARC-13. The adhesive was optimized for titanium and composite bonding, and a compatible surface preparation for titanium and composite substrates was identified. The data obtained with the improved adhesive system indicated it would meet the 589 K (600 F) properties desired for application on space shuttle components. Average titanium lap shear data were: (1) 21.1 MPa (3355 psi) at RT, (2) 13.0 MPa (1881 psi) at 600 F, and (3) 16.4 MPa (2335) after aging 125 hours at 600 F and tested at 600 F

A ‘work in progress’?: UK researchers and participation in public engagement

The funders of UK research seek to embed public engagement by researchers within the culture of UK research. Within this context, this paper provides a snapshot of the UK public engagement landscape by reporting on new quantitative research that examines the experiences and perspectives of UK researchers (n = 2,454) and public engagement support staff (n = 260). The research suggests that ambitions to embed public engagement by researchers within institutional cultures can be understood as a 'work in progress'. There are indications that public engagement is part of the UK research landscape. At the same time, the research suggests that researchers' public engagement efforts are currently constrained; there is evidence of a disconnect between researchers themselves and broader institutional contexts of public engagement, and the sector is overwhelmingly driven by funding and rewards for research, teaching and other activities. In conclusion, these results indicate that, while current strategies have been helpful, longer term effort is required, perhaps targeting particular domains and, more fundamentally, perhaps featuring greater support and reward for public engagement

Manufacturing processes for fabricating graphite/PMR 15 polyimide structural elements

Investigations were conducted to obtain commercially available graphite/PMR-15 polyimide prepreg, develop an autoclave manufacturing process, and demonstrate the process by manufacturing structural elements. Controls were established on polymer, prepreg, composite fabrication, and quality assurance, Successful material quality control and processes were demonstrated by fabricating major structural elements including flat laminates, hat sections, I beam sections, honeycomb sandwich structures, and molded graphite reinforced fittings. Successful fabrication of structural elements and simulated section of the space shuttle aft body flap shows that the graphite/PMR-15 polyimide system and the developed processes are ready for further evaluation in flight test hardware

Scanning Optical Microscopy of Semiconductor Materials and Devices

In the scanning optical microscope a focused light spot is used to illuminate the object and some property monitored as the spot is scanned relative to the object to build up an image. By monitoring different properties it is thus possible to use the scanning optical microscope in a wide range of imaging modes, which can be used to give much information concerning the structure and properties of semiconductor materials and devices. In the optical-beam induced current method the focused light spot generates electronic carriers in a semiconductor specimen, and the resultant current monitored. The technique can be used to study defects in semiconducting materials and to measure electronic properties. If instead the reflected light is monitored we can obtain images in which resolution, contrast and depth of focus are all improved relative to conventional optical microscopy. Using the confocal imaging mode surface topography of thick structures can be investigated. In the scanning optical microscope we gain all these advantages whilst avoiding the disadvantageous effects of an electron beam and the necessity for a vacuum environment

The development of low temperature curing adhesives

An approach for the development of a practical low temperature (293 K-311 K/68 F-100 F) curing adhesive system based on a family of amide/ester resins was studied and demonstrated. The work was conducted on resin optimization and adhesive compounding studies. An improved preparative method was demonstrated which involved the reaction of an amine-alcohol precursor, in a DMF solution with acid chloride. Experimental studies indicated that an adhesive formulation containing aluminum powder provided the best performance when used in conjunction with a commercial primer

Development of autoclavable addition type polyimides

Two highly promising approaches to yield autoclavable addition-type polyimides were identified and evaluated in the program. Conditions were established for autoclave preparation of Hercules HMS graphite fiber reinforced composites in the temperature range of 473 K to 505 K under an applied pressure of 0.7 MN/m2 (100 psi) for time durations up to four hours. Upon oven postcure in air at 589 K, composite samples demonstrated high mechanical property retention at 561 K after isothermal aging in air for 1000 hours. Promise was shown for shorter term mechanical property retention at 589 K upon exposure in air at this temperature

Development of autoclavable polyimides

A poly(Diels-Alder) (PDA) resin approach was investigated as a means to achieve autoclavability of high temperature resistant resin/fiber composites under mild fabrication procedures. Low void content Type A-S graphite reinforced composites were autoclave fabricated from a PDA resin/fiber prepared from an acetone:methanol:dioxane varnish. Autoclave conditions were 477K (400F) and 0.7 MN/sq m (100 psi) for up to two hours duration. After postcure at temperatures up to 589K (600F), the composites demonstrated high initial mechanical properties at temperatures up to 561K (550F). The results from isothermal aging studies in air for 1000 hours indicated potential for long-term ( 1000 hours) use at 533K (500F) and shorter-term (up to 1000 hours) at 561K (550F)

Improved expressions for performance parameters for complex filters

Improved expressions are given for the performance parameters for transverse and axial gains for complex pupil filters. These expressions can be used to predict the behavior of filters that give a small axial shift in the focal intensity maximum and also predict the changes in gain for different observation planes

Information Efficiency of Binary Communication Systems (Final Report v.I)

Most of the work which has been done with binary communication systems up until now has assumed operation in a symmetric mode. This work is concerned with the problem of evaluating various combinations of modulation and detection in both symmetric and non-symmetric modes of operation. The most frequently used criterion for describing performance in a binary system is total probability of error, A discussion of this and other criteria such as realizable rate and minimum energy per bit factors is given. A new criterion called information efficiency is defined which is based on realizable information rate on a per symbol basis. The primary advantage of this criterion is that it gives a truer indication of performance than probability of error in the case of unsymmetric operation. Several types of conventional binary systems are analyzed and compared under the conditions that additive gaussian white noise is the only perturbing influence. Systems considered include amplitude shift keying or a carrier on-off type of modulation with linear envelope detection and with synchronous detection, phase shift keying of a phase reversal type of modulation with both synchronous and phase comparison detection schemes, Performance curves showing information efficiency and probability of error as functions of signal-to-noise ratio are given. A similar type of analysis is given for a group of matched filter systems which includes both coherent and non-coherent matched filter detection of amplitude and frequency shift keyed signals in the face of gaussiam white noise and the coherent matched filter detection of phase shift keyed signals,, Also included are some results concerning the use of differentially coherent detection of phase shift keyed signals. The response of various systems to variations in decision thresholds is examined and it is shown that phase shift keyed systems are superior in this respect. The optimum detection of amplitude shift keyed signals requires a variable threshold level for different conditions at the detector input, fee case of fixed threshold systems is examined and it is shown that a fixed threshold limits the maximum attainable performance of the system and that there is a distinct trade-off between this maximum possible performance at high signal-to-noise ratios, and good performance (i.e., near optimum) at low signal-to-noise ratios. The problem of Rayleigh fading is discussed and indications of fading on the performance of the various systems is given. Finally, all of the systems discussed are compared on the same basis by using a time bandwidth product which allows the signal-to-noise ratios bn which the conventional system analysis is based to be converted to an energy per symbol to noise spectral density ratio, which is the basis for matched filter analysis

Lorentz Beams

A new kind of tridimensional scalar optical beams is introduced. These beams are called Lorentz beams because the form of their transverse pattern in the source plane is the product of two independent Lorentz functions. Closed-form expression of free-space propagation under paraxial limit is derived and pseudo non-diffracting features pointed out. Moreover, as the slowly varying part of these fields fulfils the scalar paraxial wave equation, it follows that there exist also Lorentz-Gauss beams, i.e. beams obtained by multipying the original Lorentz beam to a Gaussian apodization function. Although the existence of Lorentz-Gauss beams can be shown by using two different and independent ways obtained recently from Kiselev [Opt. Spectr. 96, 4 (2004)] and Gutierrez-Vega et al. [JOSA A 22, 289-298, (2005)], here we have followed a third different approach, which makes use of Lie's group theory, and which possesses the merit to put into evidence the symmetries present in paraxial Optics.Comment: 11 pages, 1 figure, submitted to Journal of Optics